New Q820E QuikTrak™ Stand-On Mower

Specifications

Compare >>> Select up to 2 models to compare specifications

John DeereQ820E QuikTrak™ Stand-On Mower

Add Model --Please Select-- Q810E Q820M Q850M Q850R Q865R EFI

Add Model --Please Select-- Q810E Q820M Q850M Q850R Q865R EFI

Engine Manufacturer/model	FX730V
Engine power	Gross at 3,600 rpm: 23.5 hp 17.5 kW
Fuel tank capacity	5.6 U.S. gal. 21.2 L
Mower deck size	48-in. (122-cm) fabricated
Blade tip speed	Approximately 18,000 fpm 5486 m/min
Transmission	Separate hydraulic pumps and motors
Speed range	0-8 mph 0-12.9 km/h
Drive wheels	18x10.5-10 pneumatic
Caster wheels	11x4-5
Warranty	36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation.

Manufacturer/Model	FX730V
Power	Gross at 3,600 rpm: 23.5 hp 17.5 kW
Displacement	44.3 cu in. 726 cc
Injection
Cylinders	Two, V-twin
Crankcase capacity	With filter, 2.2 qt 2.1 L
Oil filter	Full flow, replaceable
Lubrication	Full pressure
Cooling	Forced air, with integrated clean out ports
Air cleaner	Heavy-duty canister type with safety element

Fuel type	Gasoline
Fuel consumption
Fuel tank capacity	5.6 U.S. gal. 21.2 L
Fuel tank switch/shut-off valve	Yes

Charge system	At 3,600 rpm 20A
Battery voltage	12 V
Cold cranking amp	300 CCA
Hour meter	Digital
Operator presence starting system	Yes

Transmission	Separate hydraulic pumps and motors
Hydraulic pumps	0.61 cu in. 10 cc
Wheel motors	12 cu in. 196 cc
Travel speed	Speed range 0-8 mph 0-12.9 km/h Forward Infinite, 0-8 mph Infinite, 0-12.9 km/h Reverse Infinite, 0-3.5 mph Infinite, 0-5.6 km/h
Speed and direction control	Twin hand-controlled levers
Hydraulic capacity	With filter, dry, 5 qt 4.7 L
Hydraulic oil cooler	Radiator core
Filter	Spin-on replaceable

Warranty	36 months or 1200 hours, whichever comes first. First 24 months, no hour limitation.

Drive wheels	18x10.5-10 pneumatic
Rear tires
Load rating	4 PR

Dynamic braking	Dual hand-controlled levers
Park brake	Tire engagement
Park brake actuation	Hand lever

Type	Electro-magnetic with brake, 125 lb-ft 169 Nm
Drive	V-belt

Size	48-in. (122-cm) fabricated
Deck construction	Fabricated steel, floating mount system
Deck thickness	7 gauge 0.180 in. 4.6 mm
Discharge	Side
Height-of-cut range	Increments 0.25 in. 0.64 cm 1.5-5 in. 3.8-12.7 cm
Cutting width	48-in. (122-cm) fabricated

Length
Thickness	0.25 in. 0.64 cm
Blade tip speed	Approximately 18,000 fpm 5486 m/min
Number	Three

Caster wheel type	Flat free
Caster wheels	11x4-5
Front anti-scalp rollers	Double-captured center
Rear anti-scalp rollers

Length	59.75 in. 151.8 cm
Width	With chute down, 62 in. 157 cm
Height	46 in. 117 cm
Weight	800 lb 363 kg

Rollover protective structure (ROPS)
Slope operating limit

Date collected	28-Aug-2023